Tuesday October 6, 2026 - Antique Tractors & Large Shop Auction

The paint is weathered, with traces of green, yellow and red, and there's verdigris on the side tank. No fan shroud. Not pressure tested. Sold a...

The paint is in fair condition and the core looks intact, with light fin damage. Not pressure tested. Sold as is. Good for restoration or parts.

possibly International Harvester / Farmall, with a painted copper/brass core, threaded mounting studs, lower outlet neck, overflow tube and bottom mou

The core fins are heavily corroded and will need recoring. The tanks show verdigris and some traces of red paint. Not pressure tested. Sold as is. For

It has a slotted drive coupling, a bolted cover plate, mounting ears and flange, and threaded ports. Exact use not confirmed. Shows dust and age. Sold

They look like bolt-on or slide-in caster legs for a trailer, a wagon, an implement cart, a hay elevator or a shop dolly. There's surface rust o...

Matched pair of flat steel adjustable bars, each with a row of 9 drilled pin-adjustment holes for length/position adjustment.

Nameplate rated 115 AC volts, 9 amps, 1,000 VA/watts, single phase, 2-wire, 1,800 RPM, 60 cycle, field amps 4, CSA certified. Belt-driven via a multi-

Surface shows a matte black finish with light wear and some surface residue; no visible cracks, splits, or major damage in the photo. A blank tag is z

Galvanized/light-colored finish throughout, with black carbon/soot staining visible inside and around the top opening, consistent with use as a mounte

with three bolt holes on top for attaching to a drawbar or implement frame; below it, a forged jaw/yoke with a pin hole for a hitch pin, cushioned by

Rust staining and an orange/yellow residue mark visible near the top edge; overall surface shows light rust and weathering consistent with the other g

Galvanized gray finish with a rust-stained seam line running the length of the body and light surface rust and grime overall. A flat, angled metal bra

It shows wear consistent with age and use, including surface rust, paint loss, and dirt. The assembly appears complete as pictured, but function of th

Vintage 18-inch pressed steel V-belt pulley in original red paint, with two belt grooves. It has a recessed center with a 3-bolt mounting pattern and

It shows heavy surface rust with traces of old blue-gray paint. Some of the mesh screening near the bottom is torn or missing, and the lower center ed

They are in good overall condition with paint wear, light surface rust, and dirt. One bolt hole has a remnant of old hardware in it. No cracks or chip